Construction ID: ECO-10G
Carpet / tiles / timber / laminates / synthetics
Fermacell 2E11 / Gypsym fibre board
System IDEAL ECO 150 kPa wood fibre
UDL
2.0 kN/m²
Floor finish
Construction height
20mm
Fermacell 2E11
JUPITER IDEAL ECO
Perimeter support batten
Perimeter insulation
Primary insulation i.e. Foamglas
30mm
100-150mm
Technical Data
Construction suitable for floors with significant heat loss below
Construction height*
Mass*
Thermal resistance, R-value**
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Ground floors or floors located above unheated rooms such as garages, basements etc.
Additional information
mm
100-150
Height excluding floor finish
kg/m²
37-43
Mass excluding floor finish
m²K/W
0.75
kN/m²
2.0
kN
1.5
dB
-
* Based on 50 & 100mm Foamglas
** R-value of JUPITER IDEAL system only
For upper floor installations refer instead to construction ID ECO-10U.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
Fermacell elements are glued & screwed / stapled together as a floating floor.
Installation environment must be min. +10°C max. 40°C
Fermacell material format: 1500mm x 500mm x 20mm
Caution – restrictions apply to maximum tile & stone sizes on Fermacell
.zip includes:
NBS Spec
.DWG
