Construction ID: ECO-30G










Carpet / tiles / timber / laminates / synthetics
Liquid anhydrite screed
System IDEAL ECO 150 kPa

UDL
2.0 kN/m²

Floor finish
Construction height
35mm
Anhydrite screed
JUPITER system foil
Perimeter support batten
Perimeter insulation
JUPITER IDEAL ECO
30mm
Primary insulation i.e. Foamglas
115 - 165mm
Technical Data
Construction suitable for floors with significant heat loss below
Construction height*
mm
115-165
Height excluding floor finish
Mass*
kg/m²
76-82
Mass excluding floor finish
Thermal resistance, R-value**
m²K/W
0.75
.zip includes:
NBS Spec
.DWG
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Ground floors or floors located above unheated rooms such as garages, basements etc.
Additional information
kN/m²
2.0
kN
1.0
dB
26
* Based on 50 & 100mm Foamglas
** R-value of JUPITER IDEAL system only
For upper floor installations refer instead to construction ID ECO-30U.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)