Construction ID: ECO-50G
Tile / stone / timber / laminates / synthetics
Jupiter DimaMat System
System IDEAL ECO 150 kPa
UDL
2.0 kN/m²
Tile / stone
Construction height
3mm
JUPITER DimaMat system
JUPITER IDEAL ECO
Perimeter support batten
Perimeter insulation
Primary insulation i.e Foamglas
30mm
83 - 133mm
Technical Data
Construction suitable for floors with significant heat loss below
Construction height*
Mass*
Thermal resistance, R-value**
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Ground floors or floors located above unheated rooms such as garages, basements etc.
Additional information
mm
83-133
Height excluding floor finish
kg/m²
19-25
Mass excluding floor finish
m²K/W
0.75
kN/m²
2.0
kN
2.0
dB
-
* Based on 50 & 100mm Foamglas
** R-value of JUPITER IDEAL system only
For upper floor installations refer instead to construction ID ECO-40U.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
Installation environment must be min. +5°C max. +30°C
.zip includes:
NBS Spec
.DWG
