Construction ID - ECO-BJ2U
All floor finishes
Screed Replacement Tile
System IDEAL ECO 150 kPa
UDL
5.0 kN/m²
Screed Replacement Tile
Construction height
JUPITER IDEAL ECO
Supporting ply
Supporting batten
Joist
18mm
30mm
18mm
18mm
Technical Data
Construction suitable for floors between rooms of equal temperature
Construction height
Mass
Thermal resistance, R-value
Point load (≥ 20cm²)*
Impact sound reduction
Area of application
Floors with rooms of equal
temperature above & below
Rmin=0,75 m²K/W
Additional information
mm
18
System height based on S.R.T. thickness
kg/m²
43
Mass excluding floor finish
m²K/W
0.75
kN
5.0
dB
-
.zip includes:
NBS Spec
.DWG
This construction is valid for floor constructions located between rooms heated to equal or similar temperature. No further insulation is required to meet Part L requirements.
*Joist integrity dependent
For ground floor installation see construction ECO-BJ2G.
When installed the Screed Replacement Tiles may follow any undulation that occurs from the joists. This may need to be taken out with the use of a thin levelling compound.
Aluminium diffuser plates should be flush with top of joists.
