Construction ID: EPS-10G

Carpet / tile / timber / laminates / synthetics








Fermacell 2E11 / Gypsum fibre board

2.0 kN/m²
Construction height

System IDEAL EPS 240 kPa
20mm
30mm
Floor finish
Fermacell 2E11
JUPITER IDEAL EPS
Perimeter support batten
Perimeter insulation
Primary insulation i.e. Kingspan
UDL
100 - 150mm
Technical Data
Construction suitable for floors with significant heat loss below
Construction height*
Mass*
Thermal resistance, R-value**
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Ground floors or floors located above unheated rooms such as garages, basements etc.
Additional information
Working in conjunction with

mm
100 - 150
Height excluding floor finish
kg/m²
27-29
Mass excluding floor finish
m²K/W
0.86
kN/m²
2.0
kN
2.0
dB
-
.zip includes:
NBS Spec
.DWG
* Based on 50mm & 100mm Kingspan Kooltherm K103
** R-value of JUPITER IDEAL system only
For upper floor installations refer instead to construction ID EPS-10U.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
Installation environment must be min. +10°C max. 40°C
Fermacell product format: 1500mm x 500mm x 20mm
UDL & point load tested with Kingspan Kooltherm K103 ≤ 100mm
Caution – restrictions apply to maximum tile & stone sizes on Fermacell