Construction ID: EPS-20G
Engineered wooden floor
Floating floor installation
System IDEAL EPS 240 kPa
UDL
1.5 kN/m²
Floor finish
UFH compatible underlay
JUPITER IDEAL EPS
Perimeter support batten
Perimeter insulation
Intermediate supporting ply
Primary insulation i.e. Kingspan
Construction height
≤20mm
3mm
30mm
18mm
98 - 148mm+
Technical Data
Construction suitable for floors with significant heat loss below
Construction height*
Mass*
Thermal resistance, R-value**
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Ground floors or floors located above unheated rooms such as garages, basements etc.
Additional information
mm
98-148
Height excluding floor finish
kg/m²
15-17
Mass excluding floor finish
m²K/W
3.379
kN/m²
1.5
kN
1.0
dB
-
* Based on 50mm & 100mm Kingspan Kooltherm K103
** R-value of JUPITER IDEAL system only
For upper floor installations refer instead to construction ID EPS-20U.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
UDL & point load tested with Kingspan Kooltherm K103 ≤ 100mm
Working in conjunction with
.zip includes:
NBS Spec
.DWG
