Construction ID: EPS-20U









Engineered timber floor
Floating floor installation
System IDEAL EPS 240 kPa

UDL
2.0 kN/m²
Floor finish
UFH compatible underlay
JUPITER IDEAL EPS
Perimeter support batten
Perimeter insulation
Moisture barrier (if required)
Construction height

3mm
30mm
≤20mm
53mm
Technical Data
Construction suitable for rooms on intermediate floors
Construction height
Mass
Thermal resistance, R-value
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Floors with rooms of equal
temperature above & below
Rmin=0,75 m²K/W
Additional information
mm
53
Height including floor finish
kg/m²
3
Mass excluding floor finish
m²K/W
0.86
Part L compliant for floors above heated rooms
kN/m²
2.0
kN
2.0
dB
-
This construction is suitable for use on intermediate floors, no further insulation is needed to meet the requirements of Approved Document L.
For ground floor installations refer instead to construction ID EPS-20G.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
.zip includes:
NBS Spec
.DWG