Construction ID: EPS-30U
Carpet / tile / timber / laminates / synthetics
Liquid anhydrite screed
System IDEAL EPS 240 kPa
UDL
2.0 kN/m²
Anhydrite screed
Construction height
30mm
System foil and edging tape
JUPITER IDEAL EPS
Perimeter support batten
Perimeter insulation
Moisture barrier (if required)
35mm
65mm
Technical Data
Construction suitable for rooms on intermediate floors
Construction height
Mass
Thermal resistance, R-value
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Floors with rooms of equal
temperature above & below
Rmin=0,75 m²K/W
Additional information
mm
kg/m²
m²K/W
kN/m²
65
~75
0.86
2.0
Height excluding floor finish
Mass excluding floor finish
Part L compliant for floors above heated rooms
.zip includes:
NBS Spec
.DWG
kN
1.0
dB
-
This construction is suitable for use on intermediate floors, no further insulation is needed to meet the requirements of Approved Document L.
For ground floor installation see construction EPS-30G.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
