Construction ID: EPS-40U
Carpet / tile / timber / laminates / synthetics
Screed Replacement Tile (S.R.T.)
System IDEAL EPS 240 kPa
UDL
5.0 kN/m²
Floor finish
Construction height
18mm
Screed Replacement Tile
System foil
JUPITER IDEAL EPS
Perimeter insulation
Moisture barrier (if required)
30mm
48mm
Technical Data
Construction suitable for rooms on intermediate floors
Construction height*
Mass*
Thermal resistance, R-value
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Floors with rooms of equal
temperature above & below
Rmin=0,75 m²K/W
Additional information
mm
48
Height excluding floor finish
kg/m²
38
Mass excluding floor finish
m²K/W
0.86
Part L compliant for floors above heated rooms
kN/m²
5.0
kN
5.0
dB
<14
This construction is suitable for use on intermediate floors, no further insulation is needed to meet the requirements of Approved Document L.
For ground floor installation see construction EPS-40G.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
Installation environment must be minimum +5°C
SRT product format: 600mm x 250mm x 18mm
SRT product weight: 35kg/m²
Valid on concrete floors >12cm | (DIN EN 4109: m² > 276kg/m²)
.zip includes:
NBS Spec
.DWG
