Construction ID: EPS-70G
Adhered timber / tile
Jupiter Firmax CP
System IDEAL EPS 240 kPa
UDL
4.0 kN/m²
Floor finish
Construction height
12mm
30mm
JUPITER Firmax CP
JUPITER IDEAL EPS
Perimeter support batten
Perimeter insulation
Primary insulation i.e. Kingspan
92 - 142mm
Technical Data
Construction suitable for floors with significant heat loss below
Construction height*
Mass*
Thermal resistance, R-value**
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Ground floors or floors located above unheated rooms such as garages, basements etc.
Additional information
Working in conjunction with
mm
92-142
Height excluding floor finish
kg/m²
25-27
Mass excluding floor finish
m²K/W
0.86
kN/m²
4.0
kN
3.5
dB
-
* Based on 50mm & 100mm Kingspan Kooltherm K103
** R-value of JUPITER IDEAL system only.
For upper floor installations refer instead to construction ID EPS-70U.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
Installation environment must be min. +12°C max. +30°C
Firmax CP product format: 1200mm x 600mm x 12mm (2no layers @ 6mm)
Firmax CP mass: 21kg/m²
Firmax CP thermal resistance: 0.038m²K/W
UDL & point load tested with Kingspan Kooltherm K103 ≤ 100mm
.zip includes:
NBS Spec
.DWG
