Construction ID: EPS-70U
Adhered tile / timber / vinyl / synthetics
Jupiter Firmax CP
System IDEAL EPS 240 kPa
4.0 kN/m²
Floor finish
JUPITER Firmax CP
JUPITER IDEAL EPS
Perimeter support batten
Perimeter insulation
Moisture barrier (if required)
Construction height
12mm
30mm
42mm
UDL
Technical Data
Construction suitable for floors between rooms of equal temperature
Construction height
Mass
Thermal resistance, R-value
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Floors with rooms of equal
temperature above & below
Rmin=0,75 m²K/W
Additional information
mm
42
Height without floor finish
kg/m²
24
Mass without floor finish
m²K/W
0.86
Part L compliant for floors above heated rooms
kN/m²
4.0
kN
3.5
dB
-
This construction is suitable for use on intermediate floors, no further insulation is needed to meet the requirements of Approved Document L.
For ground floor installations refer instead to construction ID EPS-70G.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
Installation environment must be min. +12°C max. +30°C
Firmax CP product format: 1200mm x 600mm x 12mm (2no layers @ 6mm)
Firmax CP mass: 21kg/m²
Firmax CP thermal resistance: 0.038m²K/W
.zip includes:
NBS Spec
.DWG
