Construction ID: NEO19-10
Carpet / tiles / timber / laminates / synthetics
Fermacell 2E11 / Gypsum fibre board
System IDEAL NEO19 240 kPa
JUPITER IDEAL NEO 19
Perimeter support batten
Moisture barrier (if required)
Construction suitable for rooms with restrcited ceiling height
Height excluding floor finish
Mass excluding floor finish
Thermal resistance, R-value
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
For refurbishment areas with restricted ceiling where minimum insulation requirements are not required
Construction suitable for rooms with restricted ceiling height but does not comply with the minimum insulation level required on intermediate floors.
Should only be used in refurbishment scenarios.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
Fermacell elements are glued & screwed / stapled together as a floating floor.
Installation environment must be min. +10°C max. 40°C
Fermacell material format: 1500mm x 500mm x 20mm
Caution – restrictions apply to maximum tile & stone sizes on Fermacell