Construction ID: NEO19-50
Tile / stone
Jupiter DimaMat System
System IDEAL NEO19 240 kPa
UDL
2.0 kN/m²
Tile / stone
Construction height
Jupiter DimaMat system
JUPITER IDEAL NEO 19
Perimeter support batten
Perimeter insulation
Moisture barrier (if required)
19mm
3mm
22mm
Technical Data
Construction suitable for rooms with restricted ceiling height
Construction height
mm
22
Height excluding floor finish
Mass
kg/m²
7
Mass excluding floor finish
Thermal resistance, R-value
m²K/W
0.51
.zip includes:
NBS Spec
.DWG
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
For refurbishment areas with restricted ceiling where minimum insulation requirements are not required
Additional information
kN/m²
2.0
kN
1.0
dB
-
Construction suitable for rooms with restricted ceiling height but does not comply with the minimum insulation level required on intermediate floors.
Should only be used in refurbishment scenarios.
Substrate must be solid, level and flat so that the heating elements can lie flat. Tolerance required as per Surface Regularity 1. (+/- 3mm over 2m)
Installation environment must be minimum +5°C
Maximum tile / stone size - material and substrate dependent – call for advice
DimaMat format: Roll 1000mm x 2000mm x 1.2mm
