Construction ID: ECO-10U Part E
All floor finishes *
Fermacell 2E11 / Gypsum fibre board
System IDEAL ECO 150 kPa
UDL
2.0 kN/m²
Fermacell 2E11
Construction height 50mm
JUPITER IDEAL ECO
Structural Deck
Timber joist
Mineral wool (min. 100 kg/m³)
2 x 10mm gypsum board (suspended)
20mm
30mm
Technical Data
Construction suitable for floors between rooms of equal temperature
Construction height
Mass
Thermal resistance, R-value**
Uniform Distributed Load (UDL)
Point load (≥ 20cm²)
Impact sound reduction
Area of application
Floors with rooms of equal
temperature above & below
Rmin=0,75 m²K/W
Additional information
mm
kg/m²
m²K/W
50
31
0.75
Height excluding floor finish
Mass excluding floor finish
.zip includes:
NBS Spec
.DWG
Part L compliant for floors above heated rooms
kN/m²
2.0
kN
1.5
dB
See below
Part E compliant
This construction is valid for floor constructions located between rooms heated to equal or similar temperature. No further insulation is required to meet the requirements of Approved Document L.
*Caution with tile and stone maximum sizes
** Excludes thermal value of mineral wool
Airborne sound 56dB(≥45 dB required)
Impact sound 48 dB (≤62dB required)
Full acoustic report available
Ceiling must be suspended i.e. typical MF
